Introduction:
The Portable Flange Facing Machine is a kind of machining machine, which can repair the flange surface,
prolong the service life of the machine and reduce the industrial cost.
BT-F35 Portable Flange Facing Machine, it adopts modular structure, which makes the setting up of the machine more simple and fast.
In case of project emergency, it can take up to one minute to install the machine, and then use our machine to machining the corresponding situation.
BT-F35 is a hand power driven machine on site field machining to machining flat facing of different type and diameters of flanges.
Feature:
1) BT-F35 weighs only 10kg.
2) The tool boasts a wide mounting range of 25mm – 252 mm and is capable of facing 25mm - 350mm flanges using standard half-inch cutting tools.
3) The tool is equipped with different lead screws making it capable for resurfacing damaged raised-face or lens-ring joint flanges to the highest safety standards required.
4) The arm is rotated by hand using a worm-gear mechanism to provide a perfect spiral “gramophone” finish.
5) The tool can be adjusted with a calibrated slide to define cut depth and the correct finish.
|
Model
|
BT-F35
|
|
Facing Diameter
|
25 - 350mm
|
|
Clamping Diameter
|
25 - 265mm
|
|
Cutting material
|
Carbon steel,stainless steel,aluminium
|
|
Drive Power
|
Manual
|
|
Feed rate
|
2 kinds for stock finish
|
|
|
2 kinds for fine finish
|
|
Roughness
|
Ra1.6 to 3.2
|
|
Net Weight
|
ONLY 10KG
|
|
Packing Size
|
480*350*150mm
|
|
Shipping Weight
|
14 KG
|
